CALL US: 020 8367 3420 OR 020 8366 0555
7 DAYS A WEEK 9:30 - 17.30 (10:00 - 16:00 SUN)
INTERNATIONAL: 0044 208 367 3420 OR 0044 208 366 0555

TBS Timberwolf Bushcraft Knife Kit - Make your own Boar - Kit 2

TBS Timberwolf Bushcraft Knife Kit

The TBS range of knives are made from top quality European materials and are built to last. We have selected some the best steels for the job, the highest quality handle materials and some great leather work to bring these impeccably made knives to the market. The kits are obviously no exception.

The Timberwolf is made from is made from Sheffield O1 High Carbon Tool Steel, in Sheffield and with a great range of handle materials. It is made to an impeccable standard by our new maker and we are exceptionally happy with the fit, finish and incredible durability of this knife.

High Grade Sheffield 01 High Carbon Tool steel is one of the toughest steels out there and is used widely to make high precision tools that need to stand up to some serious punishment. O1 tool steel offers good durability, excellent wear resistance and holds a good cutting edge.

The 105mm (4 1/8") blade is 4mm thick at the spine and is a true Scandi grind, is not only super sharp straight out of the box it is easy to maintain. A Scandi grind essentially means that the whole bevel of the knife is the edge (there is no secondary bevel) so when it comes to sharpening life is made very simple. When sharpening you can simply place the entire knife on the stone, roll it up onto the bevel and you will always achieve the correct angle for sharpening; MUCH easier than a knife with a secondary bevel!

The handle is 120mm (4 3/4") long and fills the hand very nicely and are very ergonomic. There is great choice of handle materials available and all are sustainably sourced and chosen for their durability. The is currently Walnut, Curly Birch and Antler but this may always be subject to change depending on stocks available at the time. If we can't source the material from a reputable timber merchant from sustainable timber stocks we simply won't use it.

There is a choice of handle materials available for the Boar kit and each have their merits. Simply select your preference from the drop down list.

This kit does not come with a sheath allowing you to manufacture your own from scratch. There is a couple of options in store that come with a finished sheath.

Our knife range is manufactured from high quality European materials by a top, well known, European manufacturer in small batches; they are NOT churned out in their thousands in a factory in the Far East. This allows us to have ultimate control over quality and materials and we are extremely happy with the results.

Kit 1 contains:
  • A finished knife blade
  • A set of handle scales in your choice
  • A set of fibre liners
  • A set of bolts
  • A lanyard thong tube
  • A TBS Leather Sheath
Main Features:
​Typical Steel Analysis:
O1 High Carbon Tool Steel - Carbon 0.95%, Manganese 1.25%, Chromium 0.5%, Tungsten 0.50%, Vanadium 0.20%. (HRC 58)
Product Code:
The Bushcraft Store
Write an online review and share your thoughts with other shoppers!
Be the first to review this product.